Micro CZPT AC/DC Equipment Motor for Electronic UV Printer
Solution Description:
Equipment Motor-Torque Table Allowance Torque Device:Upside (N.m)/Belowside (kgf.cm)
•Gearhead and Intermediate gearhead are bought independently.
•Enter the reduction ratio into the blank() inside of the product title.
•The velocity is calculated by dividing the motor’s synchronous pace by the reduction ratio. The actual pace is two%~twenty% much less than the displayed benefit, based on the dimensions of the load.
•To lessen the pace past the reduction ratio in the subsequent desk, connect an intermediate gearhead (reduction ratio: 10) among the reducer and motor. In that circumstance, the permissible torque is 8N-m.
|
Kind Motor/Gearhead |
Gear Ratio |
three |
three.six |
five |
six |
7.5 |
9 |
twelve.five |
fifteen |
eighteen |
twenty five |
30 |
36 |
50 |
60 |
75 |
90 |
one hundred |
120 |
a hundred and fifty |
one hundred eighty |
|
Velocity r/min |
a thousand |
833 |
600 |
five hundred |
four hundred |
333 |
240 |
two hundred |
166 |
a hundred and twenty |
a hundred |
eighty three |
60 |
50 |
40 |
33 |
30 |
twenty five |
20 |
16 |
|
| Z4D40-90GN(4GN10XK) |
4GN()RC/ 4GN()RT |
.25 |
.thirty |
.42 |
.fifty |
.70 |
.84 |
one.16 |
1.39 |
1.sixty seven |
2.32 |
2.seventy eight |
3.34 |
four.64 |
5.01 |
6.27 |
7.52 |
8.00 |
eight.00 |
8.00 |
eight.00 |
|
2.55 |
3.06 |
4.28 |
5.10 |
7.14 |
8.fifty seven |
11.8 |
fourteen.2 |
17. |
23.seven |
28.4 |
34.1 |
47.3 |
51.one |
sixty four. |
seventy six.7 |
80. |
eighty. |
eighty. |
8.00 |
Dimensions(Device:mm):
Organization Info
FAQ
Q: What’re your principal products?
A: We at the moment generate Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and Higher Precision Planetary Equipment Box etc. You can check the specifications for earlier mentioned motors on our site and you can e-mail us to advocate essential motors per your specification way too.
Q: How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have in depth specs like voltage, velocity, torque, motor measurement, doing work manner of the motor, needed life time and noise amount and many others, you should do not hesitate to allow us know, then we can advocate suited motor per your request accordingly.
Q: Do you have a CZPT service for your common motors?
A: Sure, we can customize for every your request for the voltage, velocity, torque and shaft dimension/shape. If you need to have added wires/cables soldered on the terminal or need to have to insert connectors, or capacitors or EMC we can make it as well.
Q: Do you have an personal style support for motors?
A: Indeed, we would like to design motors individually for our consumers, but it might want some mold creating expense and style demand.
Q: What’s your guide time?
A: CZPTly speaking, our standard normal merchandise will need 15-30days, a bit for a longer time for CZPT items. But we are really adaptable on the direct time, it will rely on the specific orders.
You should get in touch with us if you have comprehensive requests, thank you ()
