|Security Class:||IP54 IP55|
|Body Substance:||Forged Iron/Aluminum|
|Terminal Box:||Prime or Aspect|
|Certification:||CE 3C CZPT|
The extend shaft motor adopts the layout technologyand is manufactured of heat-resistant insulating components. It can make certain the risk-free procedure of the motor in higher-temperature enviroment CZPT getting older and burning. Its motor functionality is designed according to the traits of fan and pumb load, which can help save power and adopt reinforced insulation to make sure reliable insulation and increase provider life.
one.Remember to validate regardless of whether the look of the motro is damaged before ues? Is there any oil leakage?
two.You should verify the voltage of the motor. Voltage regulator can be mounted whne voltage is unstable.
three.Please verify whether the speciation of the motor obtained is regular with the layout specification.
four.Make sure you make certain that the frame is fixed to stay away from loosening in the course of operation.
five.If sprocket, pulley,coupling are used and other accessories need to be installed according to related regulation.
six.The lubricating grease has been set into the physique of the decelerating motor, and the lubricating oil can not be altered for 12000 hours.
seven.When the motor is running, the rated present shall not exceed the existing worth indicated on the motor nameplate.
8.You should pay attention to the surrounding temperature, humidity, pH and other troubles.
nine.If it is not set up or operated in the right way, it may lead to serious injury to the motor.
ten.In the course of routine maintenance or disassembly, it is needed to confirm that the external energy provide is fully folded away from the motor.
11.The safety protection unit should be installed to make certain the basic safety of procedure.
twelve.The motor needs grounding wire, remember to refer to relevant power distribution.
13.Make sure you verify that all set up components and transmission accessories are set accurately beforestarting the deceleration motor.
fourteen.If the motor is pushed with frequency converter at low pace, it is needed to install the auxiliary cooling supporter.
15.Make sure you inform the technical office of our manufacturing facility when the motor is put in vertically.